Laboratory Test Capabilities

• Chemical Analysis
• Tensile Testing
• SEM/EDS Analysis
• Drop Weight Tear Testing
• Wear Testing
• Hardness Testing
• Corrosion Testing
• Heat Treating
• Grain Size Dermination
• Charpy/Izod Toughness Tests
• Weld Procedure Qualifications
• Volume Fraction Analysis
• Coating Thickness Measurements
• Salt Fog Testing
• Material Type Verification
• Reverse Engineering

Testing is an integral part of conducting a failure analysis.

We are afflilated with the only AWS Accredited Test Facilitiy in Houston and one of only four accredited laboratories in Texas maintaining A2LA and ISO 9003 compliance. We can provide full service chemical, mechanical and metallurgical testing capabilities staffed by experienced personnel and equipped with the latest technology.

Through laboratory testing we can determine a component's tensile strength, hardness, toughness and chemical properties. Scanning electron microscopy (SEM) is used to observe fractures at high magnifications to determine their fracture mode. Energy dispersive spectroscopy (EDS) is used to investigate the composition of corrosion products and deposits. Corrosion studies can be performed to verify an alloys' corrosion resistance to a specific environment or to confirm proper manufacture.

Results for routine testing are typically available with 48 hours and receipt of the sample. We can also provide 24-hour and weekend service for time-critical needs.